Sand & Shore play trays are 3D printed beach scene trays you print at home. Fill the tray with kinetic sand or play dough and scatter your loose parts across both zones. Two tray versions let you pick the layout that fits your setup best.

What’s included: 10×10″ Beach Play Trays. Two versions: Straight-across & Diagonal shoreline [STL & 3MF print formats]

Recommended filament: Polymaker Panchroma Matte PLA

Supports needed: No

Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

Note: The play tray is 10×10 in (254×254 mm) and may need to be scaled down to fit your print bed. No prime tower or brim used in slicer settings. Purge to infill recommended.