Trays

  • Gingerbread Lane: Cookie Bowl + Tray

    This cookie bowl and tray are part of the Gingerbread Lane Play Collection. Print them on your own 3D printer, and you get a lidded bowl that looks like a frosted gingerbread cookie plus a matching tray with icing trim. Use them to store play minis and cookie letters, serve up pretend treats, or keep a sensory activity contained on the table.

    What’s included:

    • Gingerbread cookie bowl with lid (5.5 x 5.25 in)

    • Gingerbread cookie tray (6.25 x 9.25 in)

    [STL & 3MF print formats]

    Recommended filament: Polymaker Panchroma Matte PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

    Note: The tray is about 9.25 in long and might need to be scaled down to fit smaller print beds. The letters and cookie minis in the photos are for example only and aren’t included in this listing.

  • Gingerbread Lane: DIY Gingerbread House

    This gingerbread house is part of the Gingerbread Lane Play Collection. Print it on your own 3D printer, and then the kids can snap peppermints, gumdrops, chocolate chips, and tiny cookies onto the roof and walls, pull them off, and decorate it all over again. Want to decorate it a different way? The no-studs version gives them a blank house for paint, puffy paint, or craft store loose parts.

    What’s included:

    • Gingerbread house activity (10 x 7.25 in), in two versions: with studs for snap-on candies, and without studs for painting or other decorating

    • 10+ snap-on candy styles

    • Removable stands to prop up your creation

    • Printing and assembly instructions (PDF)

    [STL & 3MF print formats]

    Recommended filament: Polymaker Panchroma Matte PLA, plus Panchroma Gradient Starlight and Gradient Celestial PLA for some of the candies

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

    Note: The gingerbread house is about 10 x 7.25 in and might need to be scaled down to fit smaller print beds.

  • Trick-or-Treat Candy Play Set

    Trick-or-Treat Candy Play Set is a collection of digital 3D print files designed to print at home for Halloween pretend play and hands-on learning. Fill the Candy Tray with treats, draw Candy Task Tokens to collect your candy, then use the Candy Prompt Sticks to turn your candy haul into playful activities for counting, sorting, matching, patterns, shapes, comparing, and early math.

    Place the Candy Task Tokens face down and draw them at random to find out which treats to collect. Once the trick-or-treat tray starts filling up, use the Candy Prompt Sticks for even more ways to play and learn with the candy you’ve collected. Print multiples of the candy minis and Task Tokens to customize the game and create a bigger candy haul!

    What’s included: Everything in the Trick-or-Treat Candy Play Set [STL & 3MF print formats]

    • Candy and treat play minis

    • Candy tray (2 sizes)

    • Jack-o’-lantern trick-or-treat tray (2 sizes)

    • 18 Candy Task Tokens (UK “sweets” version included)

    • 13 Candy Prompt Sticks (UK “sweets” version included)

    • Quick Start Guide with play and learning inspiration

    Recommended filament: Polymaker Panchroma Matte PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

    Note: Print multiples of the candy and treat minis to create a larger candy collection. Candy Task Tokens can also be printed more than once to create a bigger token pile and increase the chances of drawing the same task throughout the game.

  • Trick-or-Treat Trays

    The Trick-or-Treat Trays are digital 3D print files designed to print at home and include two Halloween-themed trays in two sizes, perfect for pretend play, sensory play, learning activities, and more. The set includes a candy-shaped tray and a classic jack-o’-lantern trick-or-treat tray for adding a little Halloween fun to your play setups.

    What’s included: Trick-or-Treat Trays [STL & 3MF print formats]

    • Candy Tray (2 sizes)

    • Jack-o’-Lantern Trick-or-Treat Tray (2 sizes)

    Recommended filament: Polymaker Panchroma Matte PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

  • Pumpkin Patch Alphabet

    Pumpkin Patch Alphabet is a digital 3D print file designed for hands-on letter learning at home. Print the tray and pumpkin tokens on your own 3D printer to create a fall-themed alphabet matching activity where kids can build their own little pumpkin patch as they learn.

    The tray features uppercase letters A–Z, and both uppercase and lowercase pumpkin tokens are included. Younger learners can match uppercase pumpkins directly to the letters on the tray, while more advanced learners can practice matching lowercase letters to their uppercase pairs. Add sensory filler to the tray for an extra layer of play, then let kids dig for pumpkins, identify the letters, and find their matches.

    What’s included: Pumpkin Patch alphabet tray (with & without letters), uppercase pumpkin tokens A–Z, lowercase pumpkin tokens a–z, and pumpkin number tokens 1–20 [STL & 3MF print formats]

    Recommended filament: Polymaker Panchroma Matte PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid.

  • Treasure Trove: Play Tray + Minis

    The play tray is 10×10 in (254×254 mm) and might need to be scaled down to fit your print bed.

    Mermaid Treasure Trove is a collection of digital 3D print files designed for sensory play and imaginative play. Print the play tray and coordinating mermaid treasures on your own 3D printer, then fill the tray with sensory filler, loose parts, or play dough to create an underwater world for exploring, sorting, collecting, and storytelling.

    What’s included: 10×10″ play tray and 30+ mermaid play minis [STL & 3MF print formats]

    Recommended filament: Polymaker Panchroma Matte PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

    Note: The play tray is 10×10 in (254×254 mm) and might need to be scaled down to fit your print bed. I didn’t use a prime tower or brim in my slicer settings – purge to infill recommended.

  • Treasure Trove: Play Tray

    The play tray is 10×10 in (254×254 mm) and might need to be scaled down to fit your print bed.

    Mermaid Treasure Trove is a digital 3D print file designed for sensory and imaginative play. Print the play tray on your own 3D printer, then fill it with sensory filler, loose parts, or play dough to create an underwater world for exploring, sorting, collecting, and storytelling.

    What’s included: 10×10″ Mermaid Treasure Trove play tray [STL & 3MF print formats]

    Recommended filament: Polymaker Panchroma Matte PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

    Note: The play tray is 10×10 in (254×254 mm) and might need to be scaled down to fit your print bed. I didn’t use a prime tower or brim in my slicer settings – purge to infill recommended.

  • Treasure Trove: Drop Tray + Minis

    Mermaid Drop Tray is a set of digital 3D print files designed for sensory play, imaginative play, and treasure hunts. Print the jewelry boxes on your own 3D printer, then hide treasures in sensory filler, collect them with tongs or fingers, and store them inside the jewelry box. It’s the perfect accessory for collecting tiny treasures, organizing loose parts, and inspiring imaginative adventures 🧜‍♀️

    What’s included: Mermaid Drop Tray (2 versions) + play minis [STL & 3MF print formats]

    • Mermaid scales jewelry box

    • Ornate jewelry box

    • Removable catch tray

    • 30+ mermaid & treasure minis

    Recommended filament: Polymaker Panchroma Matte PLA, Sunlu Silk PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

    Note: Both jewelry box styles use the same removable catch tray. It can also be used on its own for collecting nature finds, loose parts, and tiny treasures.

  • Poolside Play: Pool Trays

    The play trays are 10×10 in (254×254 mm) and might need to be scaled down to fit your print bed.

    Poolside Play trays is a bundle of digital 3D print files designed for creating a fun summer sensory play setup at home. Simply print the files on your own 3D printer, add sensory filler, play dough, or loose parts, and let little imaginations dive into hours of pool-inspired play☀️

    What’s included: 10×10″ Play trays [STL & 3MF print formats]

    Recommended filament: Polymaker Panchroma Matte PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

    Note: The play trays are 10×10 in (254×254 mm) and might need to be scaled down to fit your print bed. I didn’t use a prime tower or brim in my slicer settings. Purge to infill recommended.

  • Sand & Shore: Beach Play Trays

    The play trays are 10×10 in (254×254 mm) and might need to be scaled down to fit your print bed.

    Sand & Shore play trays are 3D printed beach scene trays you print at home. Fill the tray with kinetic sand or play dough and scatter your loose parts across both zones. Two tray versions let you pick the layout that fits your setup best.

    What’s included: 10×10″ Beach Play Trays. Two versions: Straight-across & Diagonal shoreline [STL & 3MF print formats]

    Recommended filament: Polymaker Panchroma Matte PLA

    Supports needed: No

    Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

    Note: The play tray is 10×10 in (254×254 mm) and may need to be scaled down to fit your print bed. No prime tower or brim used in slicer settings. Purge to infill recommended.