The play tray is 10×10″ (254×254 mm) and might need to be scaled down to fit your print bed. I didn’t use a prime tower or brim in my slicer settings.

Build your own little world. 🌿 Puddles & Petals: Garden Play Tray is a 3D printed small world scene designed for open-ended sensory play that kids can set up, tear down, and build again a hundred different ways.

The tray features three distinct play zones: a garden/mud area, a stone path winding through the middle, and a pond/puddle. Drop in the loose parts, scatter some frogs by the pond, bury a worm in the garden, and let them take it from there.

What’s included: Garden play tray (garden area, stone path, and pond scene) [STL & 3MF print formats]. Comes with two edge variations: scallop and straight edge.

Recommended filament: Polymaker Panchroma Matte PLA

Supports needed: No

Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid. No prime tower or brim. Tested on the Snapmaker U1.