Sand & Shore is everything your kid needs for a day at the beach, no sunscreen required. Print the tray and minis at home, fill the tray with kinetic sand or play dough, scatter the minis across both zones, and let them build their own little slice of the shore.

What’s included: 20+ Beach play minis. 10×10″ Beach Play Trays – Two versions: Straight-across & Diagonal shoreline [STL & 3MF print formats]

Recommended filament: Polymaker Panchroma Matte PLA

Supports needed: No

Print settings: Layer height 0.20mm, wall count 2, infill 15% Gyroid or Grid. Tested on the Snapmaker U1.

Note: The play tray is 10×10 in (254×254 mm) and may need to be scaled down to fit your print bed. No prime tower or brim used in slicer settings. Purge to infill recommended.